Face steam device

Works on cleaning the skin and opening the pores and removes dirt and accumulated impurities. Gives the face a natural radiance, as warm steam increases sweating, which widens blood vessels and activates blood circulation. Provides relaxation, as warm steam offers calmness and relaxation, and aromatic oils can be added to increase effectiveness. It is recommended to sit in front of the device, with the face slightly tilted towards the steam mask. Avoid placing the face close to the mask; always keep a distance from it. Do not expose the steam device for more than 20 minutes a day, two to three times a week. When the water finishes and evaporates, and you decide to turn off the device, please turn the power button to the (0) position; the indicator light will go out. After finishing the facial steam, it is recommended to rinse the face with cold water, then use a moisturizing mask or your preferred cleanser or exfoliating cream. Please disconnect the plug from the power outlet before disposing of the remaining water in the device. Wait until the device cools down (10-15 minutes) before disconnecting the steam mask from the device. To disconnect the steam mask from the device, turn it counterclockwise (see picture 1). Benefits of using a facial steam device: This device is a basic tool for a woman's beauty, and it is an essential necessity for skin care. Using steam for the face prepares the skin and makes it ready for various cosmetic products such as moisturizing, deep cleaning, and nourishment. Steam opens the skin pores and increases blood circulation speed, which is an excellent preparation for receiving other cosmetic products. Using facial steam increases the effectiveness of various skin cosmetic products. Important points: Do not use the device if there are skin inflammations, heart problems, eczema, or psoriasis. The device is for home use only. Please check the voltage indicated on the device and use the same voltage at home when plugging it in. Cleaning and removing persistent deposits make the device provide the best results and last longer. The device is used when the steam mask is assembled with the device. If the device cable is damaged, it must be replaced by the manufacturer or authorized service center. Also, in case of need for spare parts, children and people with physical or mental disabilities should not operate the device without assistance or supervision. This device is not a toy and should not be left with children to play with. Do not remove any part of the device while it is operating to avoid injury from hot water or high temperature of the device parts. Do not operate the device for more than 20 minutes at a time. Please turn off the device and unplug it from the power outlet when stopping its operation. Do not direct the steam towards the eye area or any sensitive areas, and keep the eyes closed when facing the steam. Do not keep the facial steam device close to the face for a long continuous period to prevent skin pain. Do not use during sleep or drowsiness. Keep the device cord away from heat sources or hot surfaces. Risks to avoid: Do not store or keep the device in an area where it might fall, be pulled, or fall into a water basin. Do not use the device while bathing. Do not immerse the device in water or other liquids. When the water nears the end in the device, turn it off and let it cool before completely emptying it. If the device falls into water, turn it off immediately and unplug it. Electrical voltage: 220-240 volts Electrical power: 120 watts