GR- Selotekts S 15 KG

🧪 Graffiti Resin – Silotekt S (GR–Silotekt S)

High-performance water-repellent coating designed to protect porous surfaces such as natural stone, concrete, brick, plaster, and exterior paints.

It provides advanced protection against water penetration and moisture without altering the color or natural appearance of the surface, making it ideal for both engineering and decorative applications, indoors and outdoors.

✨ General Description

Silotekt S from Graffiti Resin Projects is a premium-grade Water Repellent system designed to protect natural and porous surfaces from water absorption and moisture-related damage.

Its deep penetration into the pores creates long-lasting resistance against water and degradation—without any visual impact on the surface finish or color.

🏆 Key Features

🛡️ Superior water and moisture repellency

🏠 Suitable for both interior and exterior application

🔍 Completely transparent—does not change surface color or appearance

⚙️ Does not alter the structural composition or texture of the surface

🌬️ Resistant to mold and fungal growth

🧱 High penetration depth into substrate pores

⏳ Long-lasting performance with high weather durability

🛠️ Recommended Applications

Ideal as a protective coating for:

🔹 Brickwork

🔹 Concrete (all types)

🔹 Sand-lime brickwork

🔹 Cement fiber boards

🔹 Mineral plasters and render finishes

🔹 Natural and artificial stone

🔹 Exterior paints

🔹 Aerated (lightweight) concrete

⚙️ Application Method

✔ Ensure the surface is clean and free from dust and oils.

✔ Surface moisture content must not exceed 5%.

✔ Remove any loose or peeling materials.

✔ Pre-treat damaged areas with suitable repair materials if needed.

✔ Shake the container well or mix until fully homogenized.

✔ Apply using brush, roller, spray, or immersion.

❌ Do not apply on visibly wet surfaces or where water is present.

👉 If applying multiple coats, ensure the previous coat is still slightly wet to allow proper bonding.

🌧 Avoid exposure to rain until the product is fully dry.

⏱ Drying Times (Based on TDS)

• Working time: Fast-reacting

• Initial drying: Approx. 1 hour

• Final drying: 3 hours

• Ideal application temperature: 35°C

• Thinner: Not recommended

📦 Storage & Shelf Life

📌 Shelf life: 12 months when stored at ≤ 25°C

🚚 Store in a dry, sealed, ventilated area away from direct sunlight

🧯 Dispose of remaining material safely and in accordance with environmental regulations

⚠️ Safety Instructions

🔸 Avoid contact with eyes or skin

🔸 Use in a well-ventilated area

🔸 Wear protective gloves and safety goggles during application

🔸 In case of contact, rinse immediately with plenty of water

🔥 Keep away from flames and heat sources during use

📄 Follow all safety and MSDS guidelines