20W Solar Power Generation Kit with 6000W Inverter and 30A Controller | Green Generation Store
402.50ر.س
Product description
This complete solar power kit combines a 20W monocrystalline solar panel, a 4000W peak power inverter, and a 30A solar charge controller , along with all necessary connection accessories. It provides a practical solution for charging batteries and powering compatible electronic devices, and its portable design makes it ideal for camping, travel, emergencies, and use with 12V vehicles.
Features
✔️ A complete solar energy kit including the solar panel, inverter and charge controller.
✔️ 20W monocrystalline solar panel for charging the battery using solar energy.
✔️ Inverter with a peak power of up to 4000 watts and a rated operating power of 500 watts.
✔️ AC output with a voltage of 110 or 220 volts depending on the version.
✔️ Dual USB outputs with 5V and 2.1A current for charging.
✔️ 30 Amp PWM charge controller compatible with 12 and 24V systems.
✔️ Digital LCD screen to display controller data and battery level.
✔️ Multiple protection system against low and high voltage, overload, overcurrent, overheating and short circuit.
✔️ Built-in cooling fan to help maintain operating temperature.
✔️ LED indicators show the inverter's operating status or the presence of a protection condition.
✔️ Lightweight and portable design suitable for camping, travel and emergency use.
Kit components
1. Solar panel
- Power: 20W ±5%
- Type: Monocrystalline solar panel
- Dimensions: 420 x 280 x 2.5 mm
- DC output: 12V/1.5A
- USB output: 5V/1.7A
- Weight: 0.7 kg
- Material: Aluminum substrate
- Accessories: DC cable + DC alligator clip
2. Power inverter
- Peak power: 4000 watts
- Rated power: 500 watts
- Input voltage: DC 10.5–15V
- Output voltage: AC 110/220V
- Output frequency: 50/60 Hz
- Wave type: Modified sine wave
- Dimensions: 205 x 117 x 58 mm
- Power indicator: Green LED
- Protection indicator: Red LED
- Battery display: Five-level LED indicator, each level representing approximately 20% of battery capacity.
3. Solar charge controller
- Type: PWM
- Charging current: 30 amps
- Voltage: 12/24V with automatic conversion
- Display: Digital LCD
- USB ports: Two ports
- USB output: 5V/2.1A
- Operating temperature: -35 to +60°C
- Dimensions: 148.5 x 78 x 35 mm
Protection systems
The power inverter contains a range of protection systems to aid in safe use, including:
✔️ Protection against low voltage.
✔️ Protection against overvoltage.
✔️ Protection against overload.
✔️ Protection against overcurrent.
✔️ Protection against high temperatures.
✔️ Protection against short circuits.
✔️ A cooling fan to help dissipate heat.
When the inverter is working normally, the green LED indicator lights up, while the red indicator appears when one of the protection functions is activated.
Uses
Suitable for use in:
✔️ Camping and outdoor excursions.
✔️ Charging electronic devices.
✔️ Emergency situations and power outages.
✔️ Vehicles that operate on a 12-volt system.
✔️ Charging batteries using solar energy.
✔️ Operate low-consumption electronic devices within the permitted power capacity.
Compatible devices
The inverter can be used with devices that do not exceed 500 watts as total rated operating power , such as some small electronic devices, charging equipment, and emergency equipment.
Important: The inverter uses a modified sine wave , so it is not recommended for use with appliances that contain motors or sensitive loads, such as air conditioners, water pumps, refrigerators, microwave ovens, coffee machines, induction cookers and hair dryers.
How do you choose the right inverter power?
Calculate the total wattage of the devices you want to power, then choose an inverter with a higher wattage than your expected maximum load. It's best to leave an additional margin of at least 10% to 20% to avoid constantly running the inverter at maximum capacity.
Package contents
- 1 x Power Inverter
- 1 x 20W solar panel
- 1 x 30 Amp PWM Solar Charge Controller
- 2 x Battery Clips
- 1 x Cigarette lighter plug
- 1 x User Manual
