Magic Laker - the treatment for dullness and falsehood

Magic Liquid Car is a thick glass coating that reacts with the surface of the car to hide the dullness and hide the fading by 75-95% and restores the shine to your car by 85-95% (depending on the condition of your body), hides surface scratches and hides and protects from washing circles, it is recommended to use it for cars that are more than 4 years old or have shown dullness and fading. Features: water-repellent property. restoring color depth. ease and simplicity in applying the product. restores gloss and a beautiful reflection. significantly hides dullness. hides surface scratches. suitable for most surfaces and colors. resistant to corrosion. provides high hardness and thickness. hardness: 10H. endurance: up to 3 years or more or up to 500 washes. thickness: 04µm. quantity: 250 milliliters. quantity: one container is enough for a small to medium car. quality certificates: ISO9001/MSDS. test the surface before ordering or applying the product with water: if water on the body shines and dullness or fading disappears, then the body needs smoothing with a clay bar only, then apply the magic liquid car, but if nothing changes, then the body needs sanding or polishing, then test the surface again with water before applying the magic liquid car to achieve an excellent result (the water on the body almost looks like the result after applying the product). Easy method of use with detailed explanation: - Shake the container well before use. - It is better to test on a small area to know the correct method and not to apply the product on the entire car until you see the result on the small area and you have exactly known the method. - It is important and necessary to prepare the surface by polishing or sanding or smoothing using the clay bar or glove or clay before applying the product, the better your preparation, the higher the gloss and the more hiding of dullness and fading (sanding for difficult cases - polishing for medium cases - smoothing for simple cases). - Wash and dry the car (and ensure there is no wax or silicone or any polishing materials on the body, and to ensure no waxy materials, clean the surface with a spray of 70% disinfectant alcohol, then you will notice the surface is completely dry). - Apply a generous and sufficient amount (drench with the material) of the product on a soft cloth or thick soft tissue (make sure it is soaked with the material). - Also put some drops on the surface of the car scattered and evenly. - Wipe the surface in a vertical or horizontal manner gently and evenly to cover the entire surface (during the wiping time, you have 5 seconds to correct mistakes or areas not covered, but after that, do not go back and wipe again over what has been wiped). - Some advanced cases require an additional layer after the initial drying to show better gloss (60 minutes between each layer). - After finishing, ensure the surface is free of any application errors. - Leave the car in a closed place for at least 24 hours and do not wash or test the product for at least 7-10 days (the more days, the better for the product to set and dry). Watch the video: https://vt.tiktok.com/ZSabyjry2/ Instructions to avoid mistakes during application (very simple): - Before applying the product on the entire car, it is preferable to test on a small area. - Application should be in a place with strong lighting or during the day (to see clearly and avoid any mistakes). - After applying the product, carefully check the area to ensure the product has been evenly distributed and wiped completely. - Do not use the product on dusty, rainy, snowy, or humid days, and avoid morning dew and dust. - It is very important to keep the car in a closed place during the first 6 hours to allow the surface layer to dry without leaving marks. - Do not apply the product if the car surface is hot or under direct sunlight, and in summer weather, the material needs more speed and concentration (because the material evaporates quickly and will dry faster). - Monitor the car, and if any application marks appear within the first 3 hours, remove them with alcohol-based materials (disinfectant alcohol spray). If more than 3 hours pass and the marks are not removed, then polishing or sanding with a clay bar is necessary.