Hydro Nano Ceramic

The Hydro Nano Ceramic Spray is an advanced formula made from SiO2 and graphene to protect your car's surface and increase its shine, with a noticeable depth of color. The product comes with a special microfiber cloth (free). Features: water-repellent property at a 125-degree angle. Adds depth of color. Reduces dust adhesion on the body. Protects from ultraviolet rays. Easy and simple to apply. Adds a beautiful shine and reflection. Resists surface scratches. Suitable for most surfaces and colors. Even if PPF is installed, it is suitable. Works on some types of tinting at 30%. Hardness: 12H. Durability: up to a year or more, or up to 300 washes (the nano layer is renewed after the first 6 months). Water slide angle: 125 degrees. Thickness: 01µm. Quantity: 250 milliliters. Quantity: one bottle is enough for a small to medium car twice (once for the first application and once after 6 months). Quality certificates: ISO9001/MSDS. Easy application method with detailed explanation: - Shake the bottle well before use. - It is recommended to polish the surface before application or smooth using Kleeja. - Wash and dry the car (and ensure no wax, silicone, or any polishing materials are on the surface; to ensure no waxy substances remain, clean the surface with 70% alcohol disinfectant spray; you will notice the surface is completely dry afterward). - Spray a little of the product onto the microfiber cloth (to prevent the cloth from absorbing the product from the surface), then spray the surface from about 25 cm away. - Leave the product for 15-30 seconds, then gently wipe the surface until completely gone. (The hotter the weather, the fewer seconds to wait). - It is best to test on a small area; if you feel the wiping is heavy, reduce the waiting seconds. - Leave the car for at least 24 hours in a closed place or choose a day with clear weather, no strong wind or dust. Do not wash or test the product for at least 7-10 days (the more days, the better for the product to bond and dry). Watch the video: https://vt.tiktok.com/ZSASRPhNJ Instructions to avoid errors during application (very simple): - Before covering your entire car, it is preferable to test on a small area. - Apply in a place with very good lighting or during the daytime (best to apply during the day or late afternoon to wipe off any nano residue properly). - Do not spray too much on one area (if you notice areas with more depth of color, wipe until completely gone). - The product spray is strong; if you want to prevent the product from reaching certain areas (e.g., the car's glass), cover them during spraying. - Do not use the product on dusty, rainy, snowy, or humid days, and avoid morning dew and dust. - It is very important for the car to be in a closed place during the first 6 hours to allow the surface layer to dry without leaving marks. - After applying the product, carefully inspect the area to ensure the product has been evenly distributed and wiped off completely, with no residue or color depth left. - Monitor the car, and if any application marks appear within the first 4 days, remove them with alcohol-based materials or damp baby wipes. If more than 4 days pass without removal, polishing or sanding with Kleeja is necessary.