Radiator water - Mercedes-Benz Genuine Anticorrosion / Freeze Agent

Original Mercedes-Benz coolant and anti-corrosion agent for protecting cooling systems in Mercedes-Benz vehicles according to approved MB 325.6 specification. This coolant was developed to provide long-term protection against freezing, boiling, rust, and internal corrosion inside the radiator, water pump, and cylinder head. It contains advanced additives that prevent scale deposits and maintain cooling efficiency and engine temperature stability in all weather conditions. 🔹 The product is a concentrate and must be diluted with distilled water before use. 🔹 Designed for Mercedes-Benz vehicles that require MB 325.6 specification. Type: Anticorrosion / Freeze Agent Standard: MB 325.6 Brand: Mercedes-Benz Usage: Engine cooling system 🟦 Method of use ⚠️ Important: Follow the instructions on the packaging and the vehicle manual for the best results. Ensure the engine is completely cold before working. Mix the fluid at the recommended ratio from Mercedes (usually 50% coolant + 50% distilled water). Carefully open the expansion tank or radiator cap. Add the mixture up to the specified level. Start the engine with the heater on to purge air from the system. After cooling, recheck the level and top up if needed. ⚠️ Do not open the cooling system when the engine is hot. 🟦 Safety warnings (according to the leaflet) Contains Ethylene Glycol. Harmful if swallowed and may cause serious organ damage (especially kidneys). May cause skin and eye irritation. Do not inhale fumes or spray. Use gloves and eye protection when handling. Keep out of reach of children. In case of ingestion or severe exposure, seek medical help immediately. Disposal according to local environmental regulations. 🟦 Storage tips Keep in a tightly sealed container. Store in a cool, dry place away from sunlight. Do not mix with incompatible coolant fluids that do not meet MB 325.6 standards. Do not reuse old coolant.