Drill bit - Year rivet - (34397-11010)

Operating instructions Please clean the oil stain on the rubber handle or wear gloves to avoid slipping out of control. 2. Select the appropriate thread gauge and fit the nut nose piece (fit the thread size). Follow the replacement instructions for use. Replace the drill. 3. Insert the hex drive shaft into the rivet nut attachment into a 1/4 inch hex socket for your tools (electric drill / air drill / wrench). To avoid broken threads and for fast operation, please use the drill with adjustable torque and set it to the appropriate torque to fit the rivet nut work. (Note: 2. (Figure A P-BO-08A this product is applicable only to reversible power tools.) 1. First, rotate the hex shape to release the pre-internal collar on the body (Note: during replacement, place it on the head to relieve the thread rod). 4. Gently hold the rivet nut with your hand and drive the tool in the counterclockwise rotation until the thread rod stops. The nut begins to tighten with torsional force. The spindle A1 is set for the thread size, replacing the size of the thread, and the spindle A2 is set for the r. 5. Screw the rivet nut onto the thread rod. Drive the tool in the correct rotation until the thread rod drops from the bottom part of the rivet nut. (As shown in the figure, leave a gap between the rivet nut and the nose piece). Then generally move forward and press the rivet nail attached to the work opening. 6. Firmly press the rivet nut onto the workpiece. Hold the rivet nut firmly. Drive the tool in the correct rotation. Soon, the rivet nut deforms and is fixed onto the workpiece, and the drill torque stops with a clicking sound. (Note: different rivet nuts and drills have different torque control elements.) 7. Drive the tool to rotate to the left and turn the hand to loosen the rivet nut. Prepare the next rivet installation actuation. Refer to [Figure 7 Illustration].