اكس اس سكوبا الفصل السريع للمرحلة الثانية XS Scuba Second Stage Quick Disconnect
429ر.س
وصف المنتج
إذا كان لديك منظمات مختلفة للمرحلة الثانية لتكوينات مختلفة للاطقم ولم يتم توصيلها دائمًا بخرطوم الضغط المنخفض لديك ، فقد ترغب في تثبيت وصلة فصل سريع (QD) حتى لا تحتاج إلى استخدام مفتاح ربط. عندما تقوم بتبديل منظمات المرحلة الثانية وتغييرها باستخدام مفتاح ربط ، يمكن لأي فني إصلاح إخبارك إذا لم يتم ذلك بشكل صحيح ، يمكنك إلغاء ضبط المنظم لديك ولا تعرفه حتى! عادة ما يتم إحكام إغلاق مقعد الصمام الحرج لمنظمي المرحلة الثانية ضد تركيبات مدخل المرحلة الثانية. يمكن لف هذا التركيب عن طريق الخطأ إذا لم تقم أولاً بوضع مفتاح الربط المناسب على مسطحات مفتاح الربط الخاصة به قبل لف الخرطوم المناسب بمفتاح ربط آخر. يمكن أن يؤدي عدم استخدام مفتاحي ربط عند إزالة الخرطوم إلى تغيير جهد فتح الصمامات بشكل كبير ، مما يجعل المرحلة الثانية غير مجدية للغوص الآمن.
يمكن لخرطوم XS Scuba's Second Stage QD القضاء على هذه المشكلة. مطلوب QD الكامل لإعداد واحد ، ولكن إذا كان لديك عدة مراحل ثانية ، فستحتاج إلى وصلة أنثى واحدة (مضمنة) متصلة بخرطومك وتركيبات ذكر متعددة (شراء إضافي) لكل مرحلة من مراحلك الثانية الإضافية ، حتى تتمكن من التوصيل لهم في اقتران الإناث خرطوم الخاص بك. يسمح تركيب QD هذا بربط منظم المرحلة الثانية بخرطوم واحد. يتم تصنيع QD من النحاس المطلي بالكروم المتين لصيانة منخفضة وعمر طويل. برغي قفل لمنع الانفصال العرضي. يتم تنظيف أداة التوصيل في المصنع ، وتحتوي على حلقات Viton O ، وهي مصممة للضغط المنخفض فقط أقل من 200 رطل / بوصة مربعة (13.8 بار).
ماذا في الصندوق:
- المرحلة الثانية الذكر وانثى الفصل السريع
If you have different second stage regulators for different rig configurations and they are not always attached to your low-pressure hose, you might want to install a quick-disconnect (QD) fitting so you won't need to use a wrench. When you swap out second stage regulators and are changing them out with a wrench any repair technician can tell you if it is not done correctly you can de-tune your regulator and not even know it! The second stage regulators critical valve seat usually seals against the second stage Inlet fitting. This fitting can be accidentally turned if you do not first place the appropriate wrench on its wrench flats before turning the hose fitting with another wrench. Failure to use two wrenches when removing a hose can drastically change the valves opening effort, rendering the second stage useless for safe diving.
XS Scuba's Second Stage Hose QD can eliminate this problem. The complete QD is required for one set up, but if you have multiple second stages you will need one female coupling (included) connected to your hose and multiple male fittings (additional purchase) for each of your additional second stages, so you can plug them into your hose female coupling. This QD fitting allows attachment of another second stage regulator to a single hose. QD is manufactured from durable chrome plated brass for low maintenance and long life. Lock-down screw to prevent accidental disconnection. Coupling is factory cleaned, has Viton O-rings, and is designed for low pressure only below 200 psi (13.8 bars).
What's in the box:
- Second Stage Male and Female Quick Disconnect

