Bambu Lab AMS Hub

Name: Bambu Lab AMS Hub
Price: 399 SAR
Availability: OutOfStock

399ر.س

غير متوفر حالياً

وصف المنتج

محور AMS يدعم توصيل حتى 4 وحدات AMS

نظرة عامة

يعمل محور AMS على توسيع نطاق وحدات AMS المتصلة بطابعات Bambu X1/P1 Series من وحدة واحدة (4 قنوات) إلى ما يصل إلى 4 وحدات (16 قناة)، مما يزيد من سرعة تزويد الخيوط عبر وحدات AMS المتعددة ويضمن تكرار إشارة التخزين المؤقت لتحسين الأداء.

يتضمن محور Bambu Lab AMS Hub جميع الملحقات اللازمة لتوصيل وحدتين AMS بالطابعة. إذا كنت ترغب في توصيل وحدات AMS إضافية، ستحتاج إلى شراء كابل Bus إضافي وأنبوب PTFE. لتوصيل 4 وحدات AMS بالكامل، ستحتاج إلى شراء 2 كابل Bus إضافي (6pin) و2 أنبوب PTFE بطول 2 متر.

One AMS Hub can connect up to 4 AMS unitsrinter

Overview

The AMS Hub is used to expand the number of AMS connected to Bambu X1/P1 series printers from 1 AMS unit (4 channels) to a maximum of 4 AMS units (16 channels) to improve the refueling speed across your multiple AMS units and support the redundancy of a buffered signal.

*The Bambu Lab AMS Hub includes the necessary accessories to connect 2x AMS units to the printer. If you wish to add more AMS units, you need to order additional Bus cable and PTFE Tube. To use 4x AMS units, you need to order additional 2x Bus cable (6pin) and 2x 2m PTFE Tube.

图片加载失败文案

*The picture is for reference only, try to place the AMS on the left side of the AMS Hub when actually printing, otherwise the filament in the PTFE tube is easy to get stuck.

图片加载失败文案

Expand Your AMS Options

The built-in buffer of the printer can only be connected to 1 AMS. When replaced with AMS Hub, the printer will be able to connect up to 4 AMS.

图片加载失败文案

How-to video

Check out our Wiki article : Connect AMS Hub and Multi-AMS

Installation

Install the AMS Hub on the back of the printer, replacing the Filament buffer if you have one, and use the matching Bambu 4 Pin cable to connect to the printer, use the Bambu 6 Pin cable to connect to the first AMS, then continue to use the 6-pin cable to connect the remaining AMS in series.
Use the matching PTFE Tube to connect the AMS Hub and the air tube connector on the back of the printer, the tube should pass between the 4-pin plug and the spool holder to reduce the resistance.
According to the placement of the AMS and the printer, you can choose the appropriate length of the PTFE tube to connect the AMS and the AMS Hub. The tube should be as short as possible and avoid winding to reduce the feeding resistance.