EZRUN MAX 5 ESC (3-8S)

معلومات بالعربي !

سبيد كنترول من شركه هوبي وينق الرائده في صناعه القطع الكهربائيه لسيارات الريموت كنترول

السبيد كنترول مخصص لسيارات 1/5 سواء لسيارات الباجات او اللوسي

مع العلم يمكن استخدامه على سيارات 1/8 وايضا 1/7 ويعتبر تعديل قوي جدا ويعطي نتائج لا يستهان بها

معلومات عن المنتج : EZRUN MAX5-V3

الاصدار : الثالث v3

Color: Black

SKU: 30104000

الامبير : 200 امبير

مخصص لمواطير البرشلس

مدمج معه اسلاك الكهرب التي تربط مابين الماطور والاسبيد بلون اسود

• يمكن استخدامه على بطاريات من 3 سل الى 8 سل
• يمكن استخدام منفذ مروحه التبريد لبرمجه السبيد كنترول بكرت البرمجه الخاص من هوبي وينق (كرت البرمجة يباع منفرد )
• اقصى حد يمكن استخدامه مع مواطير 1000KV المخصصه لمواطير 1/5 مع العلم يمكن استخدام السبيد على اغلب مواطير 1/8
• فيش مخصص لإطفاء وتشغيل السبيد وهذه ميزه امنه جدا لا يوفرها بعض السبيدات
• الوزن 342g
• الابعاد

الطول : 93.35 MM

العرض : 58.12 MM

الارتفاع : 47.81 MM

يمكن ترقية السوفت وير الخاص بالاسبيد باستخدام كرت البرمجه الديجيتل

1/5th E-conversion

UBER UPGRADE

HPI BAJA, LOSI 5IVE, DESERT BUGGY XL + more

What is the box? 

• (1) Ezrun MAX5 ESC
• (3) 10 AWG, 200C Black wires for a brushless motor 
• (1) Extra set of 8 AWG 200C RED power wire
• (1) Extra set of 10 AWG 200C Black power wire 
• (1) Double side tape 
• (2) Heat shrink tube
• User's manual 
• A HOBBYWING decal 

Bottomline

• Compatible with sensorless brushless motors and sensored brushless motors (only in sensorless mode).
• Fully waterproof design for all weather conditions.
• Super internal switch-mode BEC with switchable voltage of 6V/7.4V and a cont. /peak current of 6A/25A for easily driving big torque servos and high voltage servos.
• Highly reliable electronic switch avoids troubles which may happen to traditional mechanical switch due to dirt, water, dash and etc.
• The built-in spark-proof circuit effectively protects not only battery and ESC connectors from damage but also users from physical injury (to hands) caused by strong electrical sparks
• produced at the battery and ESC connecting moment.
• Separate programming port to easily connect the LED program card or the LCD program box to the ESC. (purchase separately)
• Proportional brake with 9 levels of brake amount/maximum brake force and 9 levels of drag brake force.
• 5 levels of acceleration /punch from soft to aggressive for different vehicles, tires and tracks.
• Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection).
• Capacitor Protection(Only MAX5)：Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC because of overload.
• Single-button ESC programming and factory reset.
• Advanced programming via portable LED program card or multifunction LCD program box. (purchase separately)
• Firmware upgrade via HOBBYWING multifunction LCD program box (item sold separately).

Specifications

Ezrun Max 5 MAX5

IMPORTANT CHECKLIST:

• Ensure all wires and connections are well insulated before connecting the ESC to related devices, as the short circuit will damage your ESC.
• Ensure all devices are well connected, in order to prevent poor connections that may cause your vehicle to lose control or other unpredictable issues like damage to the device.
• Read through the manuals of all power devices and chassis and ensure the power configuration is rational before using this unit.
• Please use a soldering iron with the power of at least 60W to solder all input/output wires and connectors.
• Do not hold the vehicle in the air and rev it up to full throttle, as rubber tires can “expand” to an extreme size or even crack to cause serious injury.
• Stop using the ESC when its casing temperature exceeds 90℃/194℉; otherwise, your ESC will get destroyed and may also get your motor damaged. We recommend setting the
• “ESC Thermal Protection” to 105℃/221℉ (this refers to the internal temperature of the ESC).
• We recommend removing the cooling fan from ESC before exposing the vehicle to liquids and fully dry it right after the use.
• Always disconnect and remove batteries after use, as the ESC will continue to consume current if it’s still connected to batteries (even if the ESC is turned off). Long-time contact will cause batteries to completely discharge and result in damage to batteries or ESC. This will not be covered under warranty