PLA Silk

Bambu PLA Silk

Bambu PLA Silk offers a silk-like and high-glossy that adds a luxury appearance to your prints while retaining PLA's ease of use. Different with other silk filaments, Bambu PLA Silk was toughened and demonstrates greater resistance to breakage when using AMS printing. It's ideal for decorations, artistic projects, and 3D character models or any parts where you want it shinier.

Silk-like appearance with ultra-high gloss

Bambu PLA Silk brings a silk-like appearance and long-lasting high gloss to your 3D prints, transforming models into stunning art.

Silky appearance shining glow

PLA Matte VS PLA Silk

Display of Silk Prints

Bambu PLA Silk is ideal for decorations, artistic projects, and 3D character models or any parts where you want it shinier.

Enhanced Toughness & AMS Compatible

Compared with regular PLA Silk, Bambu PLA Silk was toughened and demonstrates greater resistance to breakage when using AMS printing.

Controllable gloss

The appearance gloss of the model printed by Silk material can be controlled by printing temperature and speed. To get glossier finishes, higher printing temperatures and/or lower speeds are recommended.

Recommended settings: nozzle temperature: 230 - 240 °C, outer wall speed: 30 - 60 mm/s

PLA Silk Hex Code Table

ColorHex CodeDisplayWhite#FFFFFFSilver#EAECEBPink#EEB1C1Green#4CE4A0Gold#E5B03DBlue#147BD1Purple#854CE4Copper#5E4B3C

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Accessory Compatibility

RecommendedNot RecommendedBuild PlateCool Plate, High Temperature Plate or Textured PEI PlateEngineering PlateHotendHotend with Hardened Steel Nozzle (0.4 mm)

Hotend with Stainless Steel Nozzle (0.2 mm, 0.4 mm)Hotend with Hardened Steel Nozzle (0.6 mm, 0.8 mm)GlueLiquid Glue / Glue Stick/

Recommended Printing SettingsDrying Settings (Blast Drying Oven)55 °C，8 hPrinting and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)Nozzle Temperature210 - 240 °CBed Temperature (with Glue)35 - 45 °CPrinting Speed< 250 mm/s

Physical PropertiesDensity1.32 g/cm³Vicat Softening Temperature56 °CHeat Deflection Temperature53 °CMelting Temperature152 °CMelt Index20.5 ± 1.2 g/10 min

Mechanical PropertiesTensile Strength27 ± 4 MPaBreaking Elongation Rate3.5 ± 0.6 %Bending Modulus2370 ± 150 MPaBending Strength66 ± 4 MPaImpact Strength24.5 ± 1.7 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS 

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

What's in the Box

Filament with Spool*1 & Desiccant*1

Filament Label*1

Package*1