PLA Basic Gradient

Soft Bicolor Gradient Appearance

The soft transition between two colors creates a vibrant and stunning visual effect on printed models.

Display of Gradient Prints

Gradient colors make it ideal for printing pretty toys or decorations.

High Printing Speed with Delicate Finish

Up to 300mm/s (with 0.4mm nozzle) printing speed while maintaining delicate and refined finish.

8 ~ 10 Meters Gradient Length

Smaller models with less filament consumption will have a less noticeable gradient looks, while larger models with more filament consumption comes with a noticeable gradient looks.

Excellent Layer Adhesion

As new color options in the PLA Basic series, the gradient filament retains similar performance to PLA Basic while providing even stronger layer adhesion and toughness, reducing the risk of printed parts breaking.

Z-layer Performance

Layer Adhesion (Impact Strength - Z)Improved %Normal Matte PLA6.6 kJ/m²261%Bambu PLA Basic Gradient23.8 kJ/m²Specimens：20*2*80 mm³

Accessory Compatibility

RecommendedNot RecommendedBuild PlateCool Plate, High Temperature Plate or Textured PEI PlateEngineering PlateHotendAll Size / Material/GlueBambu Liquid Glue

Glue Stick/

PLA Basic Gradient Hex Code Table

ColorHex CodeDisplayArctic Whisper#9CDBD9; #FFFFFSolar Breeze#E94B3C; #FFFFFFOcean to Meadow#307FE2; #54FF9B

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing SettingsDrying Settings (Blast Drying Oven)55 °C，8 hPrinting and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)Nozzle Temperature190 - 230 °CBed Temperature (with Glue)35 - 45 °CPrinting Speed< 300 mm/s

Physical PropertiesDensity1.24 g/cm³Vicat Softening Temperature57 °CHeat Deflection Temperature57 °CMelting Temperature160 °CMelt Index42.4 ± 3.5 g/10 min

Mechanical PropertiesTensile Strength36 ± 2 MPaBreaking Elongation Rate15.2 ± 0.5 %Bending Modulus2270 ± 60 MPaBending Strength73 ± 3 MPaImpact Strength61.2 ± 2.8 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• PLA Basic Gradient is a new color options of PLA Basic series, please use the default PLA Basic setting for printing. To obtain higher printing quality, please set lower printing speed (layers speed and acceleration).

• Drying PLA Basic Gradient is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.

• Gradient Length: 8 ~ 10 meters

What's in the Box?

Filament with Spool*1 & Desiccant*1

Filament Label*1

Package*1