PLA Sparkle
185ر.س
وصف المنتج
Bambu PLA Sparkle
Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.
However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!
Display of PLA Sparkle Prints
Accessory Compatibility
RecommendedNot RecommendedBuild PlateCool Plate, High Temperature Plate or Textured PEI PlateEngineering PlateHotendHardened Steel Nozzle 0.4 / 0.6 / 0.8 mm)
Stainless Steel Nozzle (0.4 mm)Stainless Steel Nozzle (0.2 mm)GlueBambu Liquid Glue
Glue Stick/
PLA Sparkle Hex Code Table
ColorHex CodeDisplaySlate Gray Sparkle#8E9089Crimson Red Sparkle#792B36Royal Purple Sparkle#483D8BAlpine Green Sparkle#3F5443Onyx Black Sparkle#2D2B28
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing SettingsDrying Settings (Blast Drying Oven)55 °C, 8 hPrinting and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)Nozzle Temperature190 - 230 °CBed Temperature (with Glue)35 - 45 °CPrinting Speed< 250 mm/s
Physical PropertiesDensity1.26 g/cm³Vicat Softening Temperature57 °CHeat Deflection Temperature55 °CMelting Temperature156 °CMelt Index34.2 ± 3.3 g/10 min
Mechanical PropertiesTensile Strength33 ± 3 MPaBreaking Elongation Rate11.7 ± 0.7 %Bending Modulus2310 ± 140 MPaBending Strength63 ± 4 MPaImpact Strength66.5 ± 3.6 kJ/m²
Downloads
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box:
Filament*1 & Desiccant*1
Instructions*1 & Spool Sticker*1
Package*1
Filament Label*1
