PLA Matte
149.99ر.س
وصف المنتج
Accessory Compatibility
RecommendedNot RecommendedBuild PlateCool Plate, High Temperature Plate or Textured PEI PlateEngineering PlateHotendAll Size / Material/GlueBambu Liquid Glue
Glue Stick/
PLA Matte Hex Code Table
ColorHex CodeDisplayIvory White#FFFFFFLatte Brown#D3B7A7Desert Tan#E8DBB7Ash Gray#9B9EA0Lilac Purple#AE96D4Sakura Pink#E8AFCFMandarin Orange#F99963Lemon Yellow#F7D959Scarlet Red#DE4343Dark Red#BB3D43Dark Brown#7D6556Dark Green#68724DGrass Green#61C680Ice Blue#A3D8E1Marine Blue#0078BFDark Blue#042F56Charcoal#000000
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing SettingsDrying Settings (Blast Drying Oven)55 °C，8 hPrinting and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)Nozzle Temperature190 - 230 °CBed Temperature (with Glue)35 - 45 °CPrinting Speed< 300 mm/s
Physical PropertiesDensity1.31 g/cm³Vicat Softening Temperature63 °CHeat Deflection Temperature58 °CMelting Temperature163 °CMelt Index39.4 ± 3.2 g/10 min
Mechanical PropertiesTensile Strength30 ± 5 MPaBreaking Elongation Rate14.8 ± 4.2 %Bending Modulus2360 ± 250 MPaBending Strength53 ± 6 MPaImpact Strength19.2 ± 3.7 kJ/m²
Downloads
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box:
Filament*1 & Desiccant*1
Instructions*1 & Spool Sticker*1
Package*1
Filament Label*1
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
2.If you don't have the spool model in your printer,
please click here to download.
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
