PLA Marble
160.87ر.س
وصف المنتج
Bambu PLA Marble
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.





Accessory Compatibility
RecommendedNot RecommendedBuild PlateCool Plate, High Temperature Plate or Textured PEI PlateEngineering PlateHotendHardened Steel Nozzle 0.4 / 0.6 / 0.8 mm)
Stainless Steel Nozzle (0.4 mm)Stainless Steel Nozzle (0.2 mm)GlueBambu Liquid Glue
Glue Stick/
PLA Marble Hex Code Table
ColorHex CodeDisplayWhite Marble#F7F3F0Red Granite#AD4E38
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Recommended Printing SettingsDrying Settings (Blast Drying Oven)55 °C, 8 hPrinting and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)Nozzle Temperature190 - 230 °CBed Temperature (with Glue)35 - 45 °CPrinting Speed< 250 mm/s
Physical PropertiesDensity1.22 g/cm³Vicat Softening Temperature57 °CHeat Deflection Temperature56 °CMelting Temperature156 °CMelt Index32.2 ± 4.5 g/10 min
Mechanical PropertiesTensile Strength33 ± 4 MPaBreaking Elongation Rate6.7 ± 0.5 %Bending Modulus2920 ± 180 MPaBending Strength75 ± 5 MPaImpact Strength24.0 ± 2.5 kJ/m²
Downloads
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box:

Filament*1 & Desiccant*1

Package*1

Filament Label*1




