PLA Metal

Bambu PLA Metal

Bambu PLA Metal is a metallic textured filament designed to enhance the aesthetic of your prints. It is designed to mimic the surface texture of metal, but it does not contain actual metal fillers.

With its advanced metallic shine, this filament offers a professional and high-end finish and a touch of sophistication to your prints while retaining almost the same comprehensive performance of regular PLA.

Accessory Compatibility

RecommendedNot RecommendedBuild PlateCool Plate, High Temperature Plate or Textured PEI PlateEngineering PlateHotendAll Size / Material/GlueBambu Liquid Glue 

Glue Stick/

PLA Metal Hex Code Table

ColorHex CodeDisplayIridium Gold Metallic#B39B84Copper Brown Metallic#AA6443Oxide Green Metallic#1D7C6ACobalt Blue Metallic#39699EIron Gray Metallic#43403D

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing SettingsDrying Settings (Blast Drying Oven)55 °C, 8 hPrinting and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)Nozzle Temperature190 - 230 °CBed Temperature (with Glue)35 - 45 °CPrinting Speed< 300 mm/s

Physical PropertiesDensity1.25 g/cm³Vicat Softening Temperature62 °CHeat Deflection Temperature62 °CMelting Temperature160 °CMelt Index38.6 ± 3.7 g/10 min

Mechanical PropertiesTensile Strength34 ± 4 MPaBreaking Elongation Rate14.7 ± 1.5 %Bending Modulus2290 ± 210 MPaBending Strength66 ± 3 MPaImpact Strength58.9 ± 3.4 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS 

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

What's in the Box:

Filament*1 & Desiccant*1

Package*1

Filament Label*1