One Channel Relay 5V

1 Channel 5V Relay for Arduino 1280 2560

Description:

Features:

1. With isolation groove in control area and load area.

2. With power and relay action indication, bright when connect and go off when disconnects.

3. When there is a signal in signal input, public side and common side will breakover.

4. It can be not only used as a microcontroller development board module, but also as a home appliance control.

5. It can not only control the DC or AC signal, but the 220V AC load.

6. With a permanent open and close vents contact.

7. It is convenient to connect with blue KF301 terminal access control cable.

Specification:

1. VCC: Power interface ,5V

2. GND: Ground

3. IN: Control interface .Drive Current at least 4mA

4. COM: Control circuit ground ,Connect to GND

5. Single Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62''

6. Weight: approx. 58g

Note: Please allow 1-3mm differs due to manual measurement.

Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

Included:

1 x One Channel 5V Relay Module Shield