‏XBee-PRO 900HP

Based on the specifications provided in the image, the key features of the Digimesh-PRO 900HP device are:

HARDWARE:

- Processor: ADF7023 transceiver, Cortex-M3 EFM32G230 @ 28 MHz

- Frequency Band: 902 to 928 MHz, software selectable channel mask for interference immunity

- Antenna Options: Wire, U.FL and RPSMSA

PERFORMANCE:

- RF Data Rate: 10 Kbps or 200 Kbps

- Indoor/Urban Range: 10 Kbps: up to 2000 ft (610 m); 200 Kbps: up to 1000 ft (305 m)

- Line-of-Sight Range: 10 Kbps: up to 9 miles (15.5 km); 200 Kbps: up to 4 miles (6.5 km) (2.1 dB dipole antennas)

- Transmit Power: Up to 24 dBm (250 mW) software selectable

- Receiver Sensitivity: -101 dBm @ 200 Kbps, -110 dBm @ 10 Kbps

FEATURES:

- Data Interface: UART (3V), SPI

- GPIO: Up to 15 Digital I/O, 4 10-bit ADC inputs, 2 PWM outputs

- Networking Topologies: DigiMesh, Repeater, Point-to-Point, Point-to-Multipoint, Peer-to-Peer

- Spread Spectrum: FHSS (Software Selectable Channels)

- Programmability: N/A

- Memory: 32 KB Flash / 2 KB RAM

- CPU/Clock Speed: N/A

POWER:

- Supply Voltage: 2.1 to 3.6 VDC

- Transmit Current: 215 mA

- Receive Current: 29 mA

- Sleep Current: 2.5 uA

REGULATORY APPROVALS:

- FCC (USA): MCQ XB900HP

- IC (Canada): 1946A-XB900HP

- C-TICK (Australia): Yes

- ANATEL (Brazil): Yes

- IDA (Singapore): Yes