جهاز آيجوي IJOY CAPO SRDA Squonker 100W

230

SS نفذت
غير متوفر حالياً

وصف المنتج

IJOY CAPO SRDA 100W 20700 مجموعة Squonker مع بطارية

 أعادت IJOY صياغة مجموعة Squonker الخاصة بها وجعلتها أقرب إلى قاعدة المستخدمين الأوسع بفضل رؤوس التسخين القابلة للاستبدال بسهولة. يستخدم مرذاذ COMBO SRDA رؤوسًا تذكرنا بطوابق DIY ، ولكن مع اختلاف أن لديك بالفعل لفائف مسبقة الصنع وقطن. فقط املأها بالسائل الإلكتروني من الزجاجة داخل وضع السكوانكر ، فالزجاجة مصنوعة أساسًا من البلاستيك الصلب ، مما يسهل إدخالها في الجهاز ، ولكنها تحتوي أيضًا على مكان ناعم يسهل الضغط عليه. .


 تعديل كابو سكوونك بوكس ​​، على عكس تعديلات سكوانك العادية ، قابل للتعديل ، حيث يوفر شريحة ، وحماية ، وعرض ، وبالتالي إعدادات طاقة تصل إلى 100 واط (مع بطارية 18650 حتى 80 واط). خمس ضغطات على زر إطلاق النار ستعمل على تشغيله وإيقافه ، ثم ضبط القوة الكهربائية المرغوبة باستخدام زري الجمع والطرح. ومع ذلك ، فإن التعديل محدود بالجهد الأقصى للبطارية. بالطبع ، تتميز الحماية: ضد المقاومة المنخفضة والجهد والشحن الزائد والإفراط في التفريغ والتسخين الزائد. الأبعاد الصغيرة ذات الأشكال المستديرة مثالية والشعور بالراحة في متناول اليد.


 يتم استكمال تعديل CAPO Squonk الجديد بواسطة COMBO SRDA. يحتوي البخاخ المصمم لتعديلات السكوانك على رؤوس تسخين قابلة للاستبدال ببساطة مع لفائف وقطن مسبق الصنع. يعطي ملفان مقاومة 0.13 والقوة الكهربائية الموصى بها هي 40W-80W. يُضاف السائل الإلكتروني إلى البخاخة بسهولة عبر الخيط وزجاجة السكوانك. الجهاز مصمم للتبخير المباشر للرئة.

 


 محتويات الحزمة والمعلمات


 1x كابو سكوونك بوكس ​​Mod

 بطارية 1x 20700 3000mAh

 1x محول لبطارية 18650

 1x كومبو سرادا

 1x رأس تسخين SRDA-CE 0،13Ω (40W-80W)

 1x زجاجة سكوانك

 1x كابل USB صغير

 مُكَمِّلات


 قد تتغير محتويات العبوة.


 الأبعاد: 78.2 ملم × 52.3 ملم × 30 ملم

 القوة الكهربائية المتغيرة: ماكس. 100 واط

 درجة حرارة متغيرة: 100 درجة مئوية - 315 درجة مئوية / 200 درجة فهرنهايت - 600 درجة فهرنهايت

 الأوضاع المدعومة: VW

 المقاومة المدعومة: 0.05Ω-3.0Ω

 البطارية: 18650/20700/21700 (على الأقل 25 أمبير) - 20700 متضمنة

 الشحن: منفذ USB صغير

 الخيط: 510 وملامس نابض

 حجم الزجاجة: 9 مل


 الأبعاد: 33.3 مم × 25 مم

 الملفات: اثنان

 سكوونك: نعم

 الموضوع: 510

 نصيحة بالتنقيط: 810 (Goon)


 محتويات الحزمة والمعلمات

 بطارية


 يحتوي CAPO Squonk Mod المدمج على فتحة بطارية مصممة بذكاء. يدعم ثلاثة أنواع. بالإضافة إلى 18650 الكلاسيكي ، يمكنك أيضًا استخدام أحدث 21700 و 20700. هذا الأخير مدرج أيضًا في العبوة ، بسعة 3000mAh.


 بطارية

 عرض


 في حين أن معظم السكوانكر عبارة عن تعديلات ميكانيكية ، فإن CAPO Squonk يقدم شاشة ، وإعدادًا بسيطًا للقوة الكهربائية وحماية تعزز سلامتك.


 عرض

 الشحن


 يعمل منفذ Micro USB على الشحن السريع والسهل للبطارية مباشرة داخل الجهاز.


 الشحن

 SRDA


 تسهل رؤوس التسخين القابلة للاستبدال استخدام RDA ، ويمكن الآن الاستمتاع بهذا النوع من البخاخات من قبل الجميع تقريبًا. ومع ذلك ، من الممكن أيضًا شراء طوابق DIY الكلاسيكية وبناء ملفاتك الخاصة.


 SRDA

 رأس التسخين


 يحتوي رأس التسخين المسبق الصنع بالفعل على ملفين بمقاومة إجمالية تبلغ 0.13 درجة مئوية. القوة الكهربائية الموصى بها هي 40W-80W. لا تقلق بشأن القطن ، فهو موجود بالفعل في الرأس. ومع ذلك ، يمكن استبداله إذا لزم الأمر.


 رأس التسخين

 تدفق الهواء


 يتدفق الهواء عبر الفتحات الجانبية إلى الملفات ويمتزج تمامًا مع البخار الناتج حتى تتمكن من الاستمتاع بالغيوم الضخمة والنكهة الرائعة.


 تدفق الهواء

IJOY CAPO SRDA 100W 20700 Squonker Kit with Battery

IJOY reworked its squonker kit and even brought it even closer to the wider user base thanks to easily replaceable heating heads. The COMBO SRDA atomizer uses heads reminiscent of the DIY decks, but with the difference that you already have pre-build coils and cotton. Just fill it with your e-liquid from the bottle inside of the squonker mode, the bottle is mainly made of hard plastic, which makes it easy to insert it into the device, but it also has a soft place which makes it easy to squeeze.

The CAPO Squonk box mod, as opposed to the regular squonk mods, is adjustable, offering a chip, protections, display and therefore power settings that goes up to 100W (with 18650 battery up to 80W). Five presses of the fire button will turn it on and off, then set the desired wattage with the plus and minus buttons. However, the mod limited by the maximum battery voltage. Of course, protection are featured: against low resistance, voltage, over-charge, over-discharge and over-heating. Small dimensions with rounded shapes are perfect and the mod feels great in hand.

New CAPO Squonk mod is complemented by the COMBO SRDA. The atomizer designed for squonk mods has simply replaceable heating heads with already pre-build coils and cotton. Two coils give 0.13Ω resistance and the recommended wattage is 40W-80W. E-liquid to the atomizer is easily added via the thread and the squonk bottle. The device is designed for direct lung vaping.

 

Package contents and parameters

1x CAPO Squonk Box Mod

1x 20700 3000mAh battery

1x adapter for 18650 battery

1x COMBO SRDA

1x heating head SRDA-CE 0,13Ω (40W-80W)

1x squonk bottle

1x micro USB cable

Accessories


Package contents may change.


Dimensions: 78.2mm x 52.3mm x 30mm

Variable wattage: max. 100W

Variable temperature: 100°C-315°C / 200°F-600°F

Supported modes: VW

Supported resistance: 0.05Ω-3.0Ω

Battery: 18650/20700/21700 (at least 25A) - 20700 included

Charging: micro USB port

Thread: 510 and spring-loaded contact

Bottle volume: 9ml


Dimensions: 33.3mm x 25mm

Coils: Two

Squonk: Yes

Thread: 510

Drip tip: 810 (Goon)

Package contents and parameters

Battery

The compact CAPO Squonk Mod has cleverly engineered battery slot. It supports three types. In addition to the classic 18650 you can also use the latest 21700 and 20700. The latter is also included in the package, the capacity is 3000mAh.

Battery

Display

While most squonkers are mechanical mods, CAPO Squonk offers a display, a simple wattage setting and protection that enhances your safety.

Display

Charging

The Micro USB port serves for fast and easy charging of the battery directly inside of the device.

Charging

SRDA

Replaceable heating heads facilitates use of the RDA, this type of atomizer can now be enjoyed by almost everyone. However, it is also possible to buy the classic DIY decks and build your own coils.

SRDA

Heating head

The already pre-build heating head has two coils with a total resistance of 0.13Ω. Recommended wattage is 40W-80W. Do not worry about the cotton, it is already in the head. It can, however, be replaced if necessary.

Heating head

Airflow

Air flows through the side holes to the coils and it perfectly blends with the created vapor so you can enjoy huge clouds and great flavor. 

Airflow

تصفح جميع المنتجات المتوفرة في هذا القسم


أسئلة قد تجي في بالك

‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌
‌
‌‌
‌